Browse by Supervisors

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Number of items: 12.

Ruijter, Wout (2009) Analysis of mechanical properties of woven textile composites as a function of textile geometry. PhD thesis, University of Nottingham.

Wiggers, Joram (2007) Analysis of textile deformation during preforming for liquid composite moulding. PhD thesis, University of Nottingham.

Blagdon, Mark (1998) Characterisation of fabric deformation mechanisms during preform manufacture. PhD thesis, University of Nottingham.

Garcia-Gil, Rafael (2003) Forming and consolidation of textile composites. PhD thesis, University of Nottingham.

Sherburn, Martin (2007) Geometric and Mechanical Modelling of Textiles. PhD thesis, University of Nottingham.

Modi, Dhiren (2008) Modelling and active control of the Vacuum Infusion Process for composites manufacture. PhD thesis, University of Nottingham.

Wong, Chee Chiew (2006) Modelling the effects of textile preform architecture on permeability. PhD thesis, University of Nottingham.

Crookston, Jonathan Josiah (2004) Prediction of elastic behaviour and initial failure of textile composites. PhD thesis, University of Nottingham.

Wang, Jinhuo (2008) Predictive modelling and experimental measurement of composite forming behaviour. PhD thesis, University of Nottingham.

Gommer, Frank (2013) Stochastic modelling of textile structures for resin flow analysis. PhD thesis, University of Nottingham.

Saldaeva, Elena (2010) Through thickness air permeability and thermal conductivity analysis for textile materials. PhD thesis, University of Nottingham.

Turner, Matthew Richard (1998) Tow placement studies for liquid composite moulding. PhD thesis, University of Nottingham.

This list was generated on Wed Apr 23 18:57:28 2014 BST.