Browse by Subjects

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Number of items at this level: 47.

Duan, Yu (2012) A comparison of saliency based sensorless control techniques for a PM machine. PhD thesis, University of Nottingham.

Photong, Chonlatee (2013) A current source inverter with series AC capacitors for transformerless grid-tied photovoltaic applications. PhD thesis, University of Nottingham.

De Lillo, Liliana (2006) A matrix converter drive system for an aircraft rudder electro-mechanical actuator. PhD thesis, University of Nottingham.

Sünter, Sedat (1995) A vector controlled matrix converter induction motor drive. PhD thesis, University of Nottingham.

Ebrahim, Mohammed Taha (1995) A very high speed switched reluctance generator. PhD thesis, University of Nottingham.

Jasim, Omar (2010) An extended induction motor model for investigation of faulted machines and fault tolerant variable speed drives. PhD thesis, University of Nottingham.

Webb, Philip Francis (1994) An ultrasonics based system for the extraction of range and bearing data for multiple targets. PhD thesis, University of Nottingham.

Ungku Amirulddin, Ungku Anisa (2006) Analysis and simulation of vector controlled bearingless induction motors. PhD thesis, University of Nottingham.

Xiong, Hao (2013) Antenna array geometries and algorithms for direction of arrival estimation. MRes thesis, University of Nottingham.

Wakatsuchi, Hiroki (2011) Computational studies of the electromagnetic properties of metamaterials and applications. PhD thesis, University of Nottingham.

Grundy, Andrew (2012) Congestion control framework for delay-tolerant communications. PhD thesis, University of Nottingham.

Srithorn, Phinit (2009) Control of a statcom with supercapacitor energy storage. PhD thesis, University of Nottingham.

Naylor, Phillip (1986) Coupling between electromagnetic waves and wires using transmission-line modelling. PhD thesis, University of Nottingham.

Arumugam, Puvaneswaran (2013) Design and modelling of permanent magnet machine's windings for fault-tolerant applications. PhD thesis, University of Nottingham.

Rohouma, Wesam M.M. (2013) Design control and implementation of a four-leg matrix converter for ground power supply application. PhD thesis, University of Nottingham.

Shao, Yingjuan (2011) Development and evaluation of a biomass-fired micro-scale CHP with organic rankine cycle. PhD thesis, University of Nottingham.

McCartney, Damon Andrew (2013) Development of the AnimalSeek method to evaluate the localisation ability of children under five. PhD thesis, University of Nottingham.

Goodman, Andrew Simon (2007) Direct energy converter controllers for switched reluctance motor operation. PhD thesis, University of Nottingham.

Ramalho, Mário António da Silva Neves (1996) Edge detection using neural network arbitration. PhD thesis, University of Nottingham.

Kampisios, Konstantinos T. (2010) Electrical machines parameter identification using genetic algorithms. PhD thesis, University of Nottingham.

Micallef, Christopher (2006) End winding cooling in electric machines. PhD thesis, University of Nottingham.

Agbedahunsi, Alex Taiwo (2013) Frequency control for microgrids using enhanced STATCOM and supercapacitor energy storage. PhD thesis, University of Nottingham.

Blasco Giménez, Ramón (1995) High performance sensorless vector control of induction motor drives. PhD thesis, University of Nottingham.

Galea, Michael (2013) High performance, direct drive machines for aerospace applications. PhD thesis, University of Nottingham.

Kalita, Karuna (2007) Integrating rotordynamic and electromagnetic dynamic models for flexible-rotor electrical machines. PhD thesis, University of Nottingham.

Ma, Xiaoli (2004) Investigation of novel thermoelectric refrigeration systems. PhD thesis, University of Nottingham.

Yao, Li (2006) Magnetic field modelling of machine and multiple machine systems using dynamic reluctance mesh modelling. PhD thesis, University of Nottingham.

Shahaj, Annabel (2010) Mitigation of vibration in large electrical machines. PhD thesis, University of Nottingham.

Tami, Abdelkader (1995) Modelling of rotor defects in squirrel cage induction motors using the time stepping numerical field analysis. PhD thesis, University of Nottingham.

Vodden, John Alan (2012) Modulation techniques for the cascaded H-bridge multi-level converter. PhD thesis, University of Nottingham.

Rajab, Maher I. (2003) Neural network edge detection and skin lesions image segmentation methods: analysis and evaluation. PhD thesis, University of Nottingham.

Bouzoukas, Asterios (2008) New approaches for cooling photovoltaic/thermal (PV/T) systems. PhD thesis, University of Nottingham.

Le Quesne, John (1997) Organic materials for photovoltaic devices. PhD thesis, University of Nottingham.

Hard, Kevin (2005) PEM fuel cell multi-phase system. PhD thesis, University of Nottingham.

Palmer, Duncan. (2011) Position estimation using the Digital Audio Broadcast (DAB) signal. PhD thesis, University of Nottingham.

Thomas, David William Phillip (1990) Protection of major transmission lines using travelling-waves. PhD thesis, University of Nottingham.

Raute, Reiko (2009) Sensorless control of AC machines for low and zero speed operation without additional test signal injection. PhD thesis, University of Nottingham.

Hua, Yahan (2009) Sensorless control of surface mounted permanent magnet machine using fundamental PWM excitation. PhD thesis, University of Nottingham.

Silva, César Armando (2003) Sensorless vector control of surface mounted permanent magnet machines without restriction of zero frequency. PhD thesis, University of Nottingham.

Mason, Nicholas J. (2011) Space vector modulation of a 4-leg matrix converter. PhD thesis, University of Nottingham.

Mayor, Louise Charlotte (2009) The adsorption and charge-transfer dynamics of model dye-sensitised solar cell surfaces. PhD thesis, University of Nottingham.

Warren, Mark (2007) The development of a 3-Pass Persistent Scatterer algorithm using the Integer Ambiguity Search method. PhD thesis, University of Nottingham.

Lee, Meng Yeong (2009) Three-level neutral-point-clamped matrix converter topology. PhD thesis, University of Nottingham.

Chen, Jingsi (2010) Towards single photon detection with a practical EMCCD. MSc(Res) thesis, University of Nottingham.

Orlowski, Rafal John (1976) Ultrasonic echo reinforcement for the blind. PhD thesis, University of Nottingham.

Sumner, M. (1990) Vector controlled induction motor drive using transputer parallel processors. PhD thesis, University of Nottingham.

Mak, Kuok Hang (2011) Vibration modelling and analysis of piezoelectric energy harvesters. PhD thesis, University of Nottingham.

This list was generated on Sat Aug 30 19:29:19 2014 BST.