Browse by Faculties and Schools

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Number of items at this level: 39.

Amankwah, Emmanuel K. (2013) A parallel hybrid modular multilevel converter for high voltage DC applications. PhD thesis, University of Nottingham.

Nicholls, Tristan Kit (2013) Adhesive bonding of discontinuous carbon fibre composites: an experimental investigation. PhD thesis, University of Nottingham.

Shah, Darshil Upendra (2013) Characterisation and optimisation of the mechanical performance of plant fibre composites for structural applications. PhD thesis, University of Nottingham.

Arumugam, Puvaneswaran (2013) Design and modelling of permanent magnet machine's windings for fault-tolerant applications. PhD thesis, University of Nottingham.

Kang, JiJun (2013) Determination of elastic-plastic and visco-plastic material properties from instrumented indentation curves. PhD thesis, University of Nottingham.

Vongurai, Rawin (2013) Development of digital filtering techniques in three-dimensional TLM models. PhD thesis, University of Nottingham.

Patel, Critesh (2013) Development of discontinuous fibre preforming processes. PhD thesis, University of Nottingham.

Fry, Christopher (2013) Development of magnesium-based multilayer PVD coatings for hydrogen storage applications. PhD thesis, University of Nottingham.

de Bono, John Patrick (2013) Discrete element modeling of cemented sand and particle crushing at high pressures. PhD thesis, University of Nottingham.

Hamidi, Nor Hanimah (2013) Enzymatic depolymerization of lignin by laccases. PhD thesis, University of Nottingham.

Evans, Liam (2013) Experience-based decision support methodology for manufacturing technology selection: a fuzzy-decision-tree mining approach. PhD thesis, University of Nottingham.

Teo, Yu Xian (2013) Modelling of interconnects including coaxial cables and multiconductor lines. PhD thesis, University of Nottingham.

Termtanun, Mutsee (2013) Photocatalytic degradation of pesticides using TiO2 nanoparticles. PhD thesis, University of Nottingham.

Gommer, Frank (2013) Stochastic modelling of textile structures for resin flow analysis. PhD thesis, University of Nottingham.

Yang, Lintao (2013) Experimental study of soil anisotropy using hollow cylinder testing. PhD thesis, University of Nottingham.

Zhang, Bei (2013) Confocal surface plasmon microscopic sensing. PhD thesis, University of Nottingham.

Galea, Michael (2013) High performance, direct drive machines for aerospace applications. PhD thesis, University of Nottingham.

Chen, Rui (2013) Novel particle sizing techniques. PhD thesis, University of Nottingham.

Photong, Chonlatee (2013) A current source inverter with series AC capacitors for transformerless grid-tied photovoltaic applications. PhD thesis, University of Nottingham.

Kulsangcharoen, Ponggorn (2013) Characterization and emulation of a new supercapacitor-type energy storage device. PhD thesis, University of Nottingham.

Niaz, Akbar (2013) Complementary use of electrochemical testing techniques to study corrosion processes of HVOF Inconel 625, CoNiCrAIY and WCCoCr coatings. PhD thesis, University of Nottingham.

Ogbuka, Chidi Premie (2013) Development of solid adsorbent materials for CO₂capture. PhD thesis, University of Nottingham.

McCartney, Damon Andrew (2013) Development of the AnimalSeek method to evaluate the localisation ability of children under five. PhD thesis, University of Nottingham.

Heneash, Usama (2013) Effect of the repeated recycling on hot mix asphalt properties. PhD thesis, University of Nottingham.

McGhee, Michael James (2013) Factors influencing cycle-by-cycle combustion characteristics of a diesel engine under cold idling conditions. PhD thesis, University of Nottingham.

Dunford, Alan (2013) Friction and the texture of aggregate particles used in the road surface course. PhD thesis, University of Nottingham.

Davies, Michael I. (2013) High temperature nanoindentation characterisation of P91 and P92 steel. PhD thesis, University of Nottingham.

Yang, Chao (2013) Highway asset management. PhD thesis, University of Nottingham.

Patel, Rupesh (2013) Modelling analysis and optimisation of cantilever piezoelectric energy harvesters. PhD thesis, University of Nottingham.

Pedrozo-Acuña, Diego (2013) Numerical modelling of the sorting and transport of non-uniform sediments in the swash zone. PhD thesis, University of Nottingham.

Gaskin, Joshua (2013) On bitumen microstructure and the effects of crack healing. PhD thesis, University of Nottingham.

Buttress, Adam James (2013) Physicochemical behaviour of artificial lime stabilised sulfate bearing cohesive soils. PhD thesis, University of Nottingham.

Othman, Mohd Azlishah (2013) Sub-Terahertz: generation and detection. PhD thesis, University of Nottingham.

Felfel, Reda (2013) Manufacture and characterisation of bioresorbable fibre reinforced composite rods and screws for bone fracture fixation applications. PhD thesis, University of Nottingham.

Li, Huiqi (2013) Discrete element method (DEM) modelling of rock flow and breakage within a cone crusher. PhD thesis, University of Nottingham.

Elbasuney, Sherif (2013) Enhanced flame retardant polymer nanocomposites. PhD thesis, University of Nottingham.

Ali, Sheikh Mohammod (2013) Ultrasonic and thermo-kinetic characterization of curing epoxy resin. PhD thesis, University of Nottingham.

Chalk, Kieran (2013) Weld consumables and PWHT for P92 power plant steel. PhD thesis, University of Nottingham.

Bingley, R. M. (1990) Electronic theodolite intersection systems. PhD thesis, University of Nottingham.

This list was generated on Mon Sep 29 20:39:29 2014 BST.